Electric Tankless Water Heater – ADV120FDCH

The Electric Tankless Water Heater provides a Whole Home hot water solution utilizing patented heating technology that offers instant hot water on demand.

The ADV120FDCH Electric Tankless Water Heater provides a Whole Home hot water solution utilizing patented heating technology that offers instant hot water on demand. Our Electric Tankless units are ideal for Whole Home hot water with applications such as sinks, showers, tubs, washing machines and dishwashers. Instant hot water heating means no pre-heating or stand-by heat loss, saves energy and reduces water-heating costs by up to 50%.

UV-FDCH-i8

Our ADV120FDCH is a 240V/11KW/60Hz Whole Home water heater that is easy to install as it simply wires [requires 6 gauge AWG (American Wire Gauge) copper wire] into a 240V breaker (min required one 50 Amp breaker) and uses NPT (National Pipe Thread) standard Copper ½” fittings. The compact design allows for an easy installation process. Simply mount the unit, thread on the waterlines, wire to the breaker panel and you now have on demand hot water. The ADV120FDCH requires a minimum flow rate of 0.53 GPM or 2.0 L/minute to activate the unit and it provides a temperature setting range of 86-125˚F/30-52˚C.

The ADV120FDCH is equipped with a high strength unique glossy IMD front casing and cast aluminum closed loop heating system. The water and electricity isolation system safeguards against leakage and offers protection against overheating and dry heating. The anticorrosion design reduces water scale build up extending the life of the unit. The LED widescreen touch display allows you to easily adjust the required temperature with the touch of your finger. The ADV120FDCH Electric Tankless Water Heater only heats water when you turn on the tap. Our units are efficient and economical and offer multiple residential and commercial applications.

Download User Manual (English)

Download User Manual (French)

Download User Manual (Spanish)

TECHNICAL DATA:

Model
ADV120FDCH
ADV120FDCH
Phase
1
1
Voltage V
220V
240V
Wattage  kW
9.2
12
BTU
31399
37543
Amperage A
41.82
45.83
Min. required circuit breaker A
50
50
Recommended wire size AWG Copper
6
6
at 0.5 GPM
126
150
at 1.0 GPM
63
75
at 1.5 GPM
42
50
at 2.0 GPM
31
38
at 2.5 GPM
25
30
at 3.0 GPM
21
25
at 3.5 GPM
18
21
at 4.0 GPM
16
19
at 4.5 GPM
14
17
Temp. Setting Range
30-52° C / 86-125° F
30-52° C / 86-125° F
Min. water flow to activate unit GPM / L / min
0.53/2
0.53/2
Water Connections NPT
1/2″
1/2″
Water pressure range (PSI/Mpa)
0-87 PSI / 0-0.6 Mpa
0-87 PSI / 0-0.6 Mpa
Over-temperature protection
157° F
157° F
Over-heat protection
194° F
194° F